MSD 183
- Model references
- MSD-183
JIAMOO / Doors
Pocket Door.
Pocket sliding doors that retract into the wall, with panelled, glazed and flush designs.
THE COLLECTION
Pocket sliding doors
Browse the designs and open each image to see the model references.
MSD 184 / 185
- Model references
- MSD-184 / MSD-185
MSD 186 / 187
- Model references
- MSD-186 / MSD-187
MSD 188 / 189
- Model references
- MSD-188 / MSD-189
MSD 190 / 191
- Model references
- MSD-190 / MSD-191
MSD 192 / 193
- Model references
- MSD-192 / MSD-193
MSD 194 / 195 / 196
- Model references
- MSD-194 / MSD-195 / MSD-196
MSD 197 / 198
- Model references
- MSD-197 / MSD-198
MSD 120 / 199
- Model references
- MSD-120 / MSD-199
MSD 121 / 122
- Model references
- MSD-121 / MSD-122
MSD 123 / 124
- Model references
- MSD-123 / MSD-124
MSD 125
- Model references
- MSD-125
No matching series. Try another model number or clear your search.
PROJECT DETAILS
From layout to details.
Door schedule
Specify the room, selected design, opening dimensions, wall thickness and quantity. Include the model reference when shown.
Hardware & finish
Confirm the leaf finish, frame, architraves, handles, lock and hinges or track for each opening.
Opening & clearances
Check the opening direction, finished floor level and operating clearance. Pocket and sliding doors also need the wall or track space confirmed.
How should the door opening be measured?
Measure the height on the left, in the middle and on the right; measure the width at the top, middle and bottom. Use the smallest height and width. Measure wall thickness at three positions and use the largest reading. Allow for the finished floor level. The catalogue calls for the opening to be corrected if the height or width readings differ by more than 20 mm.
How is the opening direction specified?
For a hinged door, identify the left- or right-hand side and whether it opens inward or outward, viewed from outside the room. Mark the swing on the plan and confirm it with the door schedule.
What does the installation sequence include?
The catalogue shows frame and leaf checks, frame assembly, fixing the frame with plates, fitting hinges and the leaf, installing the lock and stop, and fitting the architraves. The installer should confirm the fixing method and hardware for the selected door system.
Which dimensions are needed for the order?
Distinguish the door leaf size, clear opening inside the frame, outer frame size and overall size including architraves. Confirm wall thickness, undercut, hinges and lock positions in the final drawing.
YOUR PROJECTLet’s find the
Let’s find the
right fit.
Share your preferred collection or model, required dimensions, quantities and project location.